Text only | Text with Images

Making Your Own Fishing Tackle

Tackle Making => Soft Plastics => Topic started by: CNC Molds N Stuff on May 18, 2024, 10:52 AM

Title: Recycling Plastic (Plastisol) Baits:
Post by: CNC Molds N Stuff on May 18, 2024, 10:52 AM

Chop small and make sure pieces are DRY DRY DRY...
The Berkley GULP formulas are something else. Do not mix with plastisol.
Elastec (10X) is something else. Do not mix with plastisol.
Silicone baits are something else. Do not mix with plastisol.
Salt is hydroscopic (absorbs water), but can be dried in oven at low heat for long period if pieces are chopped fairly fine.
Some plastisols will tolerate fewer remelts than others.

Please add your own tips for recycling plastisol below

Text only | Text with Images

SMF 2.1.4 © 2023, Simple Machines